Straight output G2C152, size 3, 6 to 56 Nm, 3/8 in square with pilot - Bosch Rexroth 0608800073

For multi-spindle systems that drive joints between 6 and 56 Nm, the straight output G2C152 is the final module of the spindle. With 152 mm length A and 162 mm installed length, it defines how far the tool reaches into the fixture.

Benefits

• Axial compensation with 50 mm spring travel and 14 to 38 N spring force absorbs height tolerances and the screw's travel while it is driven in.
• The pilot on the 3/8 in square guides the socket with little play and keeps it in position during automatic infeed.
• Typical efficiency of 1: output torque reaches the fastener without deflection losses, the spindle stays on one axis.
• Designed to run maintenance-free for 1 million full-load cycles, which reduces line downtime.
• At 0.41 kg the module adds little to the moving mass of the spindle.

Specifications

Applications

• Joints from 6 to 56 Nm in series assembly
• Multi-spindle tightening systems and tightening stations on assembly lines
• Single-spindle stations on a robot or linear axis

System compatibility

• Rexroth Tightening System 350, fixtured nutrunners of size 3
• Forms the complete spindle together with EC motor, planetary gearbox and transducer
• Driven by an LTS350D or LTE350D power module or the CS351 compact system