Offset output drive VNS2A152, size 3, 6 to 53 Nm, 3/8 in square - Bosch Rexroth 0608800629

For multi-spindle systems that drive joints between 6 and 53 Nm, the offset output drive VNS2A152 is the final module of the spindle. With 152 mm length A and 240 mm installed length, it defines how far the tool reaches into the fixture.

Benefits

• Axial compensation with 50 mm spring travel and 14 to 38 N spring force absorbs height tolerances and the screw's travel while it is driven in.
• The 3/8 in square drive accepts standard sockets, so a change of fastener size only needs a new socket.
• The offset output axis allows tight hole patterns and close spindle spacing at small screw distances, with a typical efficiency of 0.93.
• Designed to run maintenance-free for 1 million full-load cycles, which reduces line downtime.
• At 1.2 kg the module adds little to the moving mass of the spindle.

Specifications

Applications

• Joints from 6 to 53 Nm in series assembly
• Multi-spindle tightening systems and tightening stations on assembly lines
• Fastening patterns with small spacing where straight spindles do not fit side by side

System compatibility

• Rexroth Tightening System 350, fixtured nutrunners of size 3
• Forms the complete spindle together with EC motor, planetary gearbox and transducer
• Driven by an LTS350D or LTE350D power module or the CS351 compact system