Angle nutrunner ErgoSpin ESA030S-G, 6 to 30 Nm - Bosch Rexroth 0608841206

Where the tool has to reach past component edges or into recesses and the target torque is up to 30 Nm, the ESA030S-G comes in. Bosch Rexroth specifies a slim angle head for this ErgoSpin angle nutrunner, and according to its order code the working range starts at 6 Nm.

Benefits

• Working range of 6 to 30 Nm per order code, selectable to match the target torque of the joint
• Angle design (ESA) with slim angle head according to Bosch Rexroth, output at right angles to the handle
• Operated on a Rexroth tightening controller, either the CS351 compact tightening system or the 350 tightening system
• Clear identification via Bosch Rexroth order number 0608841206

Specifications

Applications

• Joints with target torques from 6 to 30 Nm
• Joints in recesses or next to component edges
• Manual workstations in series assembly

System

• Handheld nutrunner of the Rexroth ErgoSpin family (ESA, ESV, ESM)
• Operation on the CS351 compact tightening system or in the 350 tightening system
• Connected via nutrunner cables of the S-... series, choose length and connector shape to suit the workstation
• Bosch Rexroth supplies the WH...S and WH...G angle heads as separate spare parts