ErgoSpin angle nutrunner ESA056G-G, 11 to 56 Nm, 3/8 in - Bosch Rexroth 0608841228

The ErgoSpin ESA056G-G angle nutrunner is built for joints from 11 to 56 Nm on assembly lines where every result counts. Its integrated transducer captures the tightening process directly in the tool, with a maximum output speed of 710 rpm.

The nutrunner is operated on a Rexroth tightening controller, either the CS351 compact tightening system or Tightening System 350. Tightening programs and limits are set there.

Benefits

• Working range 11 to 56 Nm: one tool for all joints within this torque window
• Angle design: output at right angles to the handle, for fastening points that are hard to reach from the front
• Integrated transducer: torque is measured directly in the tool
• Maintenance-free for 1 million full-load cycles according to the manufacturer
• Standard 3/8 in square drive for commercially available sockets

Specifications

Applications

• Safety-critical joints to VDI/VDE 2862
• Assembly lines with joints from 11 to 56 Nm
• Workstations using 3/8 in sockets

System compatibility

• CS351 compact tightening system: controller and power unit in one housing for one nutrunner
• Rexroth Tightening System 350 with power unit and control unit
• S-... nutrunner cables for ErgoSpin handheld tools, length and connector shape to suit the workstation