Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
The CU 5/XH curve is a ready-to-install 90° branching module for workpiece pallet transport in Rexroth size-5 conveyor systems. An anodized aluminum support profile and king-shaft drive with sintered bevel gears allow left- or right-hand drive positions with total loads up to 300 kg at 9 m/min. Reversible operation is supported; accumulation operation is not permitted.
CU 5/XH Roller Curve for Assembly Lines, 90°, up to 300 kg - Bosch Rexroth 3842998526
BOSCH REXROTH Original product
Net price (excl. VAT)
€1,327.16
Item BRR-3842998526
Manufacturer no. 3842998526
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.3842998526
Country of originGermany
Customs tariff number84313900
ConditionNew
Article
BRR-3842998526
Frequently Bought Together
- This Item: €1,327.16
- End Plate 1040/195, Galvanized Steel, Transfer System TS 5 - Bosch Rexroth 3842545469 €222.55
- Stop Sheet 650/195, Galvanized Steel, TS 5 Transfer System - Bosch Rexroth 3842545682 €129.48
Total price
The CU 5/XH is a ready-to-install 90° diverter module for workpiece pallet transport in Rexroth assembly conveyor systems (size 5). Delivered fully assembled, it integrates directly into existing CU 5 lines and can be driven from either the inside or outside of the curve.
- Ready-to-install - no on-site adjustment required
- King-shaft drive with sintered bevel gears, compatible with drive unit AB 5; inside or outside drive selectable
- Anodized aluminum support profile - corrosion-resistant and lightweight
- Lateral guide available in steel, polymer, or aluminum
- Rollers in galvanized or nitrocarburized steel (roller spacing p = 130 mm)
- Total pallet mass up to 300 kg at 9 m/min, or up to 260 kg at 12 m/min
- Left- or right-hand curve direction configurable at order; reversible operation possible
- Optional protective covers (factory-fitted; not orderable separately)
Technical data
| Parameter | Value |
|---|---|
| Type | CU 5/XH |
| Article number | 3842998526 |
| Roller spacing p | 130 mm |
| Roller type | Full rollers |
| Max. total mass mG (v = 9 m/min) | 300 kg |
| Max. total mass mG (v = 12 m/min) | 260 kg |
| Track width b (transport direction) | 455 / 650 / 845 mm |
| Number of rollers N | 10 / 11 / 13 |
| Length of main section l1 | 921.5 / 1149 / 1376.5 mm |
| Length of secondary section l2 | 382.5 / 415 / 447 mm |
| Length of secondary section to centre of main section l3 | 650 / 780 / 910 mm |
| Length of secondary section and width of main section l4 | 917.5 / 1145 / 1372.5 mm |
| Support profile | Anodized aluminum |
| Lateral guide | Steel, polymer, or aluminum |
| Drive | King shaft with sintered bevel gears (AB 5 compatible) |
| Curve direction | Left or right (order parameter CD) |
| Accumulation operation | Not permitted |
| Reversible operation | Possible |
| Delivery condition | Ready-to-install, fully assembled |
| Weight | 0.0099 kg (base article; total weight depends on configuration) |
| Execution | TEC |
|---|---|
| Manufacturer Nr. | 3842998526 |
| Manufacturer | Bosch Rexroth |
| Country of Manufacture | Germany |
| Weight | 0.009900 |
| HS-Code | 84313900 |
| GPSR manufacturer information | Bosch Rexroth AG, Zum Eisengießer 1, DE-97816 Lohr am Main, www.boschrexroth.com |
| Article authenticity | Original product |
| Condition of article | New |
| Position sensing | No |
Write Your Own Review
Customers Who Bought This Item Also Bought
