Slotted nut NMZ 6x0.5 for ball screw fixed bearings - Bosch Rexroth R344600104

The slotted nut NMZ secures the fixed bearing on the threaded journal of the screw end: it is screwed onto the M6 x 0.5 thread, clamps the bearing axially and is tightened to 2 Nm. In operation it takes axial loads up to 17 kN.

The outer diameter is 16 mm, dimension d1 12 mm. It is locked against loosening by set screws, tightening torque 1 Nm. It matches the Bosch Rexroth fixed bearings whose scope of delivery includes a slotted nut NMZ.

Benefits

• M6 x 0.5 thread for 6 mm screw journals
• Tightening torque 2 Nm
• Axial operating load up to 17 kN
• Locked by set screw, 1 Nm
• Outer diameter 16 mm, d1 12 mm

Installation note

Observe the tightening torques specified by the manufacturer; the slotted nut is mounted on the screw journal together with the fixed bearing.