Digital Laser Receiver 80 m for Red and Green Line Lasers with mm Readout - Leica RGR 300-D

Levelling with arrows and beeps means moving the receiver until the centre is reached. The Leica RGR 300-D instead displays the offset from the laser line directly as a value in mm or inches, within a display range of ± 25 mm. A dimension can be read and recorded without shifting the staff, at distances from 2 to 80 m.

Benefits

• Digital offset readout: ± 25 mm display range in mm or inches, height differences are read off instead of chased.
• Three accuracy levels: ± 0.5 mm for fine adjustment, ± 2.0 mm and ± 5.0 mm for fast work over longer distances.
• Red and green: detects lasers at 635 nm and 525 nm, one receiver for both Lino colour variants.
• Large detection window: 85 mm window height and 45 degree detection angle at 10 m, so the line is found quickly.
• Site proof: IP65 protection and 1.2 m drop resistance, illuminated displays on front and back.
• 24 h operating time: on 2 standard AA batteries.

Applications

Height transfer outdoors and in bright halls, installation of suspended ceilings and stud walls, facade work, tiling and screed work, foundation and formwork construction, and anywhere the laser line is no longer reliably visible to the naked eye.

Compatibility and scope of delivery

Compatible with the Leica line lasers Lino P5, L2, L2G, L2P5, L2P5G, L6R and L6G. Supplied with RGR 300-D receiver, receiver clamp for the staff, 2 AA batteries, quick guide, calibration certificate and warranty card. The line laser is not included.

Standards

Detects class 2 lasers per IEC 60825-1, protection class IP65 per IEC 60529. Delivered with calibration certificate.