Torque Adapter 8.0 Nm, 1/4 Inch Hexagon Input, 1/4 Inch Square Drive Output - Bernstein 4-9608-ETB

If you already use a reversible ratchet with a 1/4 inch square drive, this adapter turns it into a precise torque tool: the tightening torque is preset to 8.0 Nm and the adapter slips noticeably once the value is reached.

Advantages

• Preset tightening torque 8.0 Nm / 81.5 kgf-cm / 70.8 in-lb.
• Bit magnetic holder 1/4 inch hexagon 6.35 mm to DIN 3126 on the input side.
• Drive 1/4 inch square to DIN 3120 for direct connection to reversible ratchets.
• Precision mechanism slips noticeably once the set value is reached, overtightening is not possible.
• 30% higher torque when loosening, since no torque release occurs during loosening.

Technical Data

Application

The adapter is used as a complete solution for work on electronic equipment, in quick-change systems, robotic stations, aerospace, medical technology or on any workbench where accurate torque via a reversible ratchet is needed. It is primarily suitable for manual operation.

Standards and Delivery Data

• Manufactured to DIN 3126 and DIN 3120, tested to DIN EN ISO 6789.
• The torque value should be checked regularly with a torque meter.
• EAN 4250838536417.
• Customs tariff number 82041100.
• Country of origin Taiwan.