ESD insert boxes 4.5x4.5E, 75x75x26 mm, for 50 mm front height, with centre divider, set of 12 - Lista 80.203

Very small components and MOS semiconductors can be kept apart in these boxes in the 4.5x4.5E grid, and each box is divided again by a centre divider. At 75 x 75 x 26 mm they fit drawers with a 50 mm front height, and the set contains 12 pieces.

Benefits

• Conductive plastic: Made of electrically conductive polypropylene, dissipative for electrostatic sensitive components.
• In the Lista grid: The 4.5x4.5E boxes can be used in all drawer sizes of the modular system.
• Chemically resistant: unaffected by most oils, acids and alkalis.
• Centre divider: Each box is split into two compartments.

Colours

This item is supplied in black conductive plastic. There is no colour choice when ordering.

Use and combination

Insert boxes organise MOS semiconductors and other sensitive small parts in drawers in component stores and at placement, test and repair stations in the EPA. The height of 26 mm is matched to drawers with a 50 mm front height. The ESD label holders are used to mark the boxes. The parts can only drain charges via an earthed base, such as an earthed drawer, mat or work surface.