Lever wire connector Lever 4 mm², 3-port, 0.2-4 mm², pack of 50 - IDEAL 30-0093DE

One wire in, two out: for branch joints in boxes and distribution panels, this 3-port lever connector joins three conductors from 0.2 to 4 mm² in an 18.9 mm wide housing. It is rated 32 A at 450 V to IEC 60998 and 20 A at 600 V to UL 486C.

Benefits

• Three ports for a standard branch joint, no extra jumper needed.
• Push solid wire straight in, open the lever for flexible wire.
• Different wire sizes from 0.14 to 4 mm² can be combined in one connector.
• Inspection window confirms that all three conductors are fully inserted.
• Reusable, with CE, UKCA, UL and ENEC approval.

Applications

• Branch joints in junction and installation boxes
• Wiring in control cabinets and equipment
• Maintenance and extension of existing circuits

Usage notes

• Turn off power before installing or removing and do not exceed the rating.
• Use only one conductor per port, strip wires back 11-12 mm.
• Rigid stranded and flexible wires: lift the lever, insert the conductor, close the lever. Check that it is fully inserted to the back of the connector.