IDC connector UR, red, 3 wires, 19-26 AWG, gel-filled, pack of 25 - IDEAL 85-925

When splicing telephone and signal lines, three wires often have to be joined at one point, for example for a tap. The red UR IDC connector takes up to 3 conductors of 19-26 AWG with insulation up to 1.68 mm, without any stripping.

Benefits

• 3 ports for butt splices with 2 or 3 wires, e.g. taps
• No stripping: insulation displacement contacts the insulated conductors directly
• Moisture-resistant gel sealant, according to the manufacturer also for outdoor locations

Applications

• Repairing, extending and adding telephone lines
• Low-voltage and signal lines, e.g. sensors and alarm systems
• Outdoor installations thanks to the gel filling

Usage notes

• Insert all unstripped conductors into the ports until they pass the internal bus bar and reach the end of the connector.
• Place the connector on the 33-719 flat pad and squeeze slowly until the coloured cap snaps into place.