ESD corner table top Quadro trapezoidal basic equipment, 40 mm - Karl 10.906.89

This table top forms the work surface of a KARL QUADRO table: as a trapezoidal corner (front edge 900 mm, depth 880 mm), 880 mm deep and 40 mm thick with a rounded postformed front edge. It is fixed to the QUADRO columns with the supplied mounting kit and can be mounted at any height. As a corner top it joins two QUADRO tables at an angle to form a corner combination. The ESD version dissipates charges through the volume-conductive core board and is built for EPAs.

Benefits

• High-pressure laminate surface (EN 438), a very hard and abrasion-resistant HPL: lightly textured, glare-free and highly scratch-resistant.
• Heat-resistant up to 180 °C for short periods and resistant to organic solvents, weak acids and alkalis, petrol and oil.
• 40 mm top with rounded postformed front edge, protected by a hard-wearing edge banding.
• Cut-outs for the QUADRO columns and mounting kit, infinitely height-adjustable mounting. Minimum height with mobile drawer cabinets: 780 mm.
• ESD version with conductive ESD high-pressure laminate and volume-conductive core board, resistance to ground < 10⁹ ohms (dry measurement to IEC 61340-5-1, 100 V).

Matching accessories and variants

• Standard version without ESD: KARL 10.906.88
• Version incl. cable tray: KARL 10.916.89
• Sheet-steel storage shelf trapezoidal corner: KARL 14.095.70
• Privacy screen trapezoidal corner: KARL 14.535.70

Applications

• EPAs in electronics manufacturing, repair and test areas
• Extending or converting existing QUADRO workstations
• Corner combinations and table rows with QUADRO tables