ESD table frame Sintro 1530 (CH) height adjustment with electric motor Memo, 1530x750x740-1140 mm - Karl 26.325.60

The table frame determines which working height, load and extension a workstation will allow later on. This frame from the Karl Sintro range is designed with dimensions of 1530x750x740-1140 mm and accepts the table top, vertical struts and add-on elements of the modular system.

ESD-safe design with dissipative connections and a central earthing point to EN 61340-5-1, protecting electronic components from electrostatic discharge.

Benefits

• Sturdy steel-tube construction with
• Levelling elements in the foot section
• Work surface load-rated for 200 kg uniformly
• Distributed load (4 lifting cylinders)
• Conductive powder-coated light grey (RAL 7035)
• Earthing box with two 10 mm press-stud connectors
• Central earthing point for connecting the ESD or protective earth
• Drive control via desk panel

Further features

• The intelligent control unit features
• 4 programmable position memories.
• The lowest and highest positions can be
• Be defined during initial commissioning and
• Be reached by means of the up/down keys.
• The table height is shown digitally.
• Height adjustment is operated via a
• Corded remote control mounted on the underside of the table.
• A current monitor protects the drive
• Against overload and at the same time acts as a
• Safety function when the system is raised.
• (incl. 3 m connection cable with CH plug)