ESD table top element, rear, Quadro transfer line 2/3, right-hand outfeed, track width 400 mm, table width 1650 mm - Karl 55.743.89

With a transfer line over 2/3 of the table width, part of the table surface remains open. The rear table top element covers the table area behind the transfer line and turns it into usable work and storage space. It fits Quadro work tables with 1650 mm table width and right-hand outfeed, for a transfer line track width of 400 mm. The conductive ESD laminate surface is part of the KARL ESD system.

Benefits

• Light grey work surface in conductive ESD high-pressure laminate (EN 438) with hard-wearing edge banding.
• Matched to the Quadro transfer line over 2/3 of the table width with 1020 mm roller or skate-wheel strips.
• Cut to the 400 mm track width, with a dedicated rear element for each track width of 300, 400 and 600 mm.
• Conductive surface for ESD workstations in electronics manufacturing.

Matching accessories and variants

• Standard version in high-pressure laminate: KARL 55.743.88
• Side table top element for 1650 mm table width: KARL 55.794.89
• Rear table top element for the other track widths: KARL 55.733.89 / 55.753.89
• Same element for left-hand outfeed: KARL 55.744.89
• ESD roller strips 1020 mm, track width 400 mm: KARL 55.643.70
• ESD skate-wheel strips 1020 mm: KARL 55.533.70

Applications

• EPAs in electronics manufacturing and assembly
• Linked workstations with manual workpiece carrier transfer
• Storage of tools, components and test equipment beside or behind the transfer line