TWIST 360 magnetic adapter, 360 degree rotation and 50 mm stand-off - Leica TWIST 360

A point or line laser often has to sit where no tripod fits, on a steel column, a ceiling profile or directly over an edge. The Leica TWIST 360 holds the Lino on the surface with strong magnets, turns it a full 360 degrees around the plumb point and places it exactly over the edge on a 50 mm stand-off, without a second set-up.

Key benefits

• Full 360 degree rotation around the plumb point, so the laser is aligned instead of the whole adapter being repositioned.
• 50 mm stand-off places the Lino precisely over edges, wall ends and openings.
• Strong magnets at the back grip instantly on steel profiles, door frames and ceiling rails.
• Fibreglass reinforced body with large slots for zip ties or nails opens up pipes, timber and other non-magnetic surfaces.
• 1/4 inch and 5/8 inch tripod threads as standard, plus a direct connection to the UAL 130 wall mount.

Technical data

Applications

Drywall and interior fit-out with metal stud work, electrical and plumbing installation on pipes and cable trays, ceiling mounting on steel profiles, and transferring plumb and alignment over edges and openings in shell construction.

Compatibility and scope of delivery

Leica Geosystems recommends the TWIST 360 for the Lino models P5-1, L2P5-1 and L2P5G-1. The 1/4 inch and 5/8 inch tripod threads fit common tripods, and the adapter combines with the Leica UAL 130 wall mount, which adds 130 mm of height adjustment. Delivery covers the adapter, the laser is not included.

Origin and marking

Made in China and listed by Leica Geosystems under material number 866130. The EAN is 7640110699362 and the customs tariff number is 9015900000.