RT-7 Flat End Resistance Tips 2.8 mm for TW-15 ResisTweez, 2 pcs - PACE 1121-0006-P2

In resistance soldering the joint is not heated from outside, the current flows through the gripped terminal itself. The TW-15 ResisTweez comes in cold, grips the pin and reflows the solder at the push of the foot switch. The RT-7 flat end tips 1121-0006-P2 form the 2.8 mm (0.11 in) wide contact faces for this.

Benefits

• Flat 2.8 mm wide face: reliable contact on pins and lugs in tight rows.
• Heat is generated only between the tips, so according to PACE neighbouring terminals are not contaminated with solder.
• Supplied as a pair, both sides of the tweezer are renewed together.

Specifications

Applications

• Soldering and desoldering wires on closely spaced connector pins
• Work on lugs and terminals
• Reflowing connector terminals without solder carry-over

Compatibility

• PACE TW-15 ResisTweez Resistance Soldering Handpiece