ESD Safety Shoe CONDOR LOW S3L, Full-Grain Leather, Width 11, Black - PUMA Safety 640521202

On the test bench and along the assembly line you stand on the same hall floor all day. The CONDOR LOW is the low-cut member of the REBOUND series. It drains the wearer's charge to ground and therefore fits an EPA to DIN EN 61340-5-1, which requires the person-shoe-floor system to stay below 100 MOhm. The low cut costs nothing in protection, the class stays S3L with a steel toe cap and a flexible FAP penetration barrier.

Why this model

• Dissipation, not just antistatic. The shoe is built for an EPA workplace to DIN EN 61340-5-1, which keeps the person-shoe-floor system below 100 MOhm. EN ISO 20345 only covers the antistatic band of 10⁵ to 10⁹ ohms, so PUMA additionally declares the CONDOR to DGUV Information 112-191.
• Steel toe cap to EN ISO 20345. The cap passes the standard test at 200 joules of impact energy and 15 kN of compression, the full safety-footwear level rather than the lower occupational-footwear one.
• Penetration protection without metal in the upper. The flexible FAP insert guards against nail penetration and bends with the step instead of stiffening the sole. PUMA declares the shaft metal-free, with no exposed metal parts.
• Cushioning that lasts a full shift. An EFFECT.FOAM midsole, the REBOUND compact PU outsole and the Evercushion pro ESD footbed form a three-layer package that returns the rebound into the next step instead of dumping it into the joints.
• Climate and durability. The BreathActive functional lining moves moisture out, the smooth full-grain leather upper is water-repellent. The outsole is slip-resistant and oil-resistant, abrasion-resistant elements sit where wear is highest.
• Low cut, full protection. The low shoe leaves the ankle free and is quick to put on and take off, without cutting back on toe or penetration protection. Width 11 in the PUMA width system.

Technical data

Applications

Electronics manufacturing and test areas, EPA zones to DIN EN 61340-5-1, assembly, order picking, maintenance and warehousing. Aimed at shifts that mostly stay inside the building, where a low shoe sits more comfortably than a boot.

Standards and compliance

PUMA Safety lists the CONDOR LOW as S3L ESD. The class code S3L only exists in EN ISO 20345:2022 and stands for a non-metallic penetration-resistant insert tested with the 4.5 mm nail. S3L covers a closed heel area, antistatic properties, an energy-absorbing heel region, a water-repellent upper, penetration resistance and a cleated outsole. The ESD workplace adds DIN EN 61340-5-1, which caps the person-shoe-floor system at 100 MOhm. EN ISO 20345 alone only covers the antistatic band from 10⁵ to 10⁹ ohms, that is 100 kilohm to 1000 megohm, and does not replace that proof. PUMA also rates the shoe according to DGUV Information 112-191. PPE risk category II.

Sizes

Available in EU sizes 39 to 47, width 11. The PUMA Safety men's size chart maps size 43 to a foot length of 27.0 to 27.5 cm and size 39 to 24.3 to 24.9 cm. Measure the foot late in the day, wearing the work sock you will actually use.