Point to point tripod adapter 360° for DISTO X3 and X4 - Leica DST 360

The width of a facade, the distance between two ceiling points or the height of a gable cannot be measured directly with the handheld device alone. On the Leica DST 360 the DISTO X3 or X4 becomes a measuring station: the adapter records the angles, the instrument the distance, and the result is the distance between two points that are only targeted from the set-up. According to the Leica data sheet the tolerance is ±2 mm at 2 m and ±10 mm at 10 m.

Advantages

• 360° horizontal, -64° to over 90° vertical: one station covers the walls, floor and ceiling of a room.
• P2P tolerance ±5 mm at 5 m: distances between inaccessible points are captured without ladder or auxiliary line.
• Additional functions in the instrument: with the DST 360 the X3 unlocks point to point distance and Smart Area, Smart Room runs via the Leica DISTO Plan app (in-app purchase).
• Metal housing: the adapter is made entirely of metal, so angle measurement stays reproducible even after transport.
• Net weight 1.31 kg: stable enough for steady sightings, light enough to carry with tripod and instrument.

Applications

As-built surveys of buildings and facades, room surveys for floor plans from a single set-up, measuring gable and ceiling heights, shopfitting, interior finishing and stair construction, and expert assessments where points have to be connected across obstacles.

Compatibility and scope of delivery

The DST 360 works with the Leica DISTO X3 and Leica DISTO X4 handheld instruments. For the DISTO X6 the DST 360-X adapter is intended. Scope of delivery: DST 360 adapter. Instrument and tripod are not included, Leica combines the adapter with the TRI 120 tripod in the P2P package.

Origin and identification

Made in China, customs tariff number 9015900000, EAN 7640110697986. The adapter is supplied without batteries.