PVC floor ramp X-LOG, 10 mm, 500 x 90 mm - Ecotile

The floor ramp finishes an area of Ecotile X500/10 tiles towards the subfloor and takes away the 10 mm edge that feet and castors would otherwise catch on. One piece is 500 mm long and covers a complete tile edge. The 90 mm wide slope connects directly to the tile via the X-LOG joint.

Advantages

• No trip edge: 10 mm height run out as a slope over 90 mm width
• 500 mm length per tile edge, suitable for X500/10 tiles (497 x 497 mm, 9.6 mm thick), joins the tile with an almost gap-free fit
• Installed like the floor itself: X-LOG click connection (X-Lock), the ramp locks into the edge joint of the tile
• REACH compliant PVC, fire rating Bfl-s1, made in the UK to ISO 9001
• Available in three colours: X59.231/1 graphite, X59.601/1 yellow (RAL 1023) and X59.221/1 grey (RAL 7015)

Applications

• Doorways and passages between rooms
• Transitions from the tiled area to adjacent floor coverings
• Access routes for pallet trucks and forklifts, the manufacturer rates X500/10 tiles for heavy traffic
• Open edges around workstations and machine footprints without trip hazards

The ramp itself is not rated as ESD compliant. Outer corners are closed with the X-LOG 10 mm corner ramp (590 x 90 mm), which joins two floor ramps.