Heißluftdüse gerade 8,4 mm rund, 17 mm lang für 707D+/997 - Quick A2084

When a QFP or SOP has to come off a board, the nozzle decides whether only the target part gets hot or half the assembly goes with it. This original QUICK nozzle guides the hot air through a round 8.4 mm outlet and carries the air flow of a 707D+ or 997 station to the joint across just 17 mm of nozzle length.

Features

• Round 8.4 mm outlet, matched to small SMD packages and single pin rows.
• Straight design with 17 mm nozzle length, so the joint stays visible while the nozzle is placed.
• A20 series, mechanically matched to the handpieces of the QUICK 707D+ and 997, no seating adjustment required.
• Heat resistant construction for continuous use at a rework bench.
• Own weight of 0.02 kg, the handpiece stays balanced during positioning.

Application and scope of delivery

For removing and refitting small SMD components, for rework on populated boards and for service work in repair shops. Scope of delivery: one hot air nozzle A2084. The nozzle belongs to the A20 series and is intended for the QUICK hot air stations 707D+ and 997.