RFID sensor for exit registration on Test Station EVO RFID-Plus - Iteco 9266103

A test station records the entry, while the exit stays unlogged without a second reader. The RFID sensor 9266.103 adds exactly that second reading point to the Test Station EVO RFID-Plus 9264.929P, so entry and exit of the same person are captured by the RFID badge and the gate can be run in both directions.

Operating features

• Second reading point at the gate - the badge is also registered when leaving the EPA, which makes dwell time available for evaluation.
• Bidirectional operation - the turnstile can be controlled in both directions instead of at the entry only.
• Tied to one station - according to the price list the sensor works exclusively with model 9264.929P.
• Pure add-on - the existing wiring and evaluation of the test station stay in place and only the reader head is added.

Applications

EPA entrances where not only the entry but also the exit has to be documented, for example to evaluate presence in the production area or for locks that are controlled in both directions. It is equally useful where a turnstile is run as the only way in and out.

Compatibility and scope of supply

The sensor is an extension and does not replace a test station. It requires the Test Station EVO RFID-Plus 9264.929P, which reads badges at 125 kHz and 13.56 MHz. According to the price list the sensor is not intended for the 9264.929 and 9264.929M versions. At the gate it works together with the turnstile 9266.100 and the dual footplate 9266.102. Supplied as one sensor.

Origin

Made in Italy.