Images are examples, some edited with AI. The technical data are authoritative. AI notice
Torque wrench MANOSKOP 755R/1 1.5-12.5 Nm without scale with 1/4 inch ratchet - Stahlwille 50100001
Clicking torque wrench MANOSKOP 755R/1 for 1.5-12.5 Nm with a permanently installed ratchet (22 teeth) and a 1/4 inch square drive. No adjustment scale, so the setting is made once with test equipment, ideal for assembly lines and series production. Particularly light design at 335 g.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
On assembly lines and in series production the same torque is applied again and again. The MANOSKOP 755R/1 is set once with test equipment within the 1.5-12.5 Nm range and has no adjustment scale that could be changed by mistake. When the value is reached it clicks with a dual stop signal, accuracy is ± 4%.
Benefits
- No adjustment scale, setting with test equipment such as STAHLWILLE No. 7707 W, SmartCheck, perfectControl No. 7794 or calibration systems No. 7706, 7791
- Measurements independent of the point of application of force
- Permanently installed ratchet for sockets with 22 teeth
- Particularly slim design, handle and shaft made of square steel tube
- Clicking mechanism insensitive to continuous loads and counter-loads up to the limit of the measuring range
- Can be supplied pre-set to a defined torque value (additional charge)
Applications
For controlled clockwise tightening on assembly lines and in series production, including aircraft engines, automotive industry, railway, agricultural machinery, commercial vehicles and wind power.
Technical data
| Measuring range (Nm) | 1.5-12.5 Nm |
|---|---|
| Measuring range (ft·lb) | 1.0-9.0 ft·lb |
| Minimum value (start of range) | 1.5 Nm |
| Nominal value | 12.5 Nm |
| Male square drive | 1/4" |
| Length L | 173.5 mm |
| Width B | 22 mm |
| Height H | 18 mm |
| Weight | 335 g |
| Manufacturer | Stahlwille |
| Manufacturer Nr. | 50100001 |
| EAN | 4018754096268 |
| HS-Code | 82041100 |
| GPSR manufacturer information | STAHLWILLE Eduard Wille GmbH Lindenallee 27 DE-42349 Wuppertal www.stahlwille.com |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Germany |
| Height | 18 mm |
| Width | 22 mm |
| Overall length [mm] | 173.5 |
| Min torque (Nm) | 1.5 |
| Max torque (Nm) | 12.5 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
