Electromechanical torque wrench MANOSKOP 730DR/40 40-400 Nm with reversible ratchet 3/4" - Stahlwille 96501840

In service and series assembly, bolts must be tightened reproducibly to the target value and the results must be documented. The MANOSKOP 730DR/40 works in the range 40-400 Nm with an accuracy of ± 2%, ± 1 digit and signals that the value is reached with the familiar mechanical click. The included reversible ratchet no. 735 with 3/4 inch output square makes it ready for use straight away.

Benefits

• Patented electromechanical release with acoustic and visual signal
• Visual evaluation of the bolted joint by green and red display, tolerance limits adjustable per joint
• Automatic correction of the tightening torque when a deviating extension length is entered, for changing insert tools
• Stores up to 7,500 results, transfer to the PC via USB interface
• Setting via 4-button keypad, automatic key lock and PIN protection of the presets
• Overload warning, indicating mode in both directions, units Nm, ft·lb and in·lb

Applications

Assembly and service in aircraft engines, the automotive industry, rail, agricultural machinery, commercial vehicles and wind power, wherever bolted joints have to be tightened to a defined and documented torque.

Standards

Calibration certificate in accordance with DIN EN ISO 6789-2:2017. Calibration with the perfectControl calibration systems no. 7794 or the calibration systems no. 7706 and 7791.