Extraction hose DN150, without end piece, sold by the meter - ULT 06.1.023

The ULT 06.1.023 extraction hose serves as a flexible capture and connection duct for ULT extraction systems with a DN150 connection. It is sold by the metre and supplied without an end piece, so the duct can be cut to fit the system and the capture point.

Benefits

• Tube diameter 150 mm for the high airflow of large extraction units.
• Sold by the metre for a precise cut to the required duct length.
• Without end piece, freely combined with capture elements.
• Suitable for ceiling, bench and wall mounting.
• Part of the DN150 extraction system of the ULT 500 range, with a matching spiral hose clamp listed by the manufacturer.

Technical data

Applications

• Capture and connection duct for large ULT extraction systems
• Extraction of solder, laser and process smoke at high airflow

Compatibility and scope of supply

The hose belongs to the DN150 extraction system of the ULT 500 range. The filter units connected there are ASD 500 MD.47 1PaR10 PE and LAS 500 MD.47 1PaR7.5 PTFE at 750 m³/h each, plus the high pressure versions ASD 500 HD.14 1PaR10 PE and LAS 500 HD.14 1PaR7.5 PTFE at 270 m³/h each. For clamping, ULT lists the spiral hose clamp 145-165 mm under number 06.0.098.

06.1.023 is the standard version. If an antistatic duct is required, ULT offers hose 06.1.028 in the same nominal width.

Supplied by the metre in DN 150 without accessories. End piece, clamps and connecting parts are not included.