Relay adjusting pliers for contact and relay springs, tip width 1.0 mm, 135 mm - Knipex 32 21 135

Contact and relay springs can only be readjusted cleanly if the tip of the pliers is slim enough and no edge scratches the part. The 32 21 135 relay adjusting pliers taper to a tip width of 1.0 mm and have polished gripping surfaces and carefully deburred edges.

Benefits

• For gripping components and wires of the smallest diameters and for bending contact and relay springs.
• Jaw length of 34.0 mm with a tip width of only 1.0 mm, which gives access to closely spaced contacts.
• Polished gripping surfaces that do not roughen sensitive surfaces.
• Edges carefully deburred, so adjusting leaves no scratches on the part.
• Jaw thickness of 7.0 mm at the joint and head width of 12.5 mm give a rigid head despite the fine tip.
• Only 74 g at an overall length of 135 mm, comfortable for fine work over longer periods.

Areas of use

Relay manufacturing, switchgear production, precision mechanics, laboratory work and repair of electromechanical assemblies. Wherever springs and thin wires are readjusted or bent and the component surface has to stay intact.

Standards and conformity

The manufacturer does not state a tool standard for this product. According to the manufacturer the pliers contain no substances of very high concern under REACH. The RoHS directive does not apply.