ERGO nut driver 10 mm with long shaft and 3-component handle - Bahco BE-7810

Fasteners set deep inside an enclosure need reach rather than force. With 10 mm across flats, a 125 mm blade and 247 mm overall, the BE-7810 gets to nuts behind brackets and inside narrow frames.

Benefits in use

• 10 mm across flats with a long socket for hexagon screws and nuts.
• Blade length 125 mm at 247 mm tool length, for joints out of reach of short sockets.
• 3-component handle from the ERGO development process, soft material over a rigid surface for grip and power transmission.
• Handle length 122 mm at 36 mm handle width, the flat sides stop the tool rolling off the bench.
• High-performance steel alloy blade, fully hardened and chrome-plated against corrosion.
• Colour marking and symbol on the handle end identify the size, the integrated hanging eye fits a shadow board.

Technical data

Applications

Assembly and maintenance in equipment and electronics manufacturing, in control cabinet building and in the service case, wherever nuts and hexagon screws of 10 mm are tightened and released in confined positions.

Scope of delivery

1 ERGO nut driver Bahco BE-7810, 10 mm across flats.

Standards and compliance

For this model the manufacturer's property table lists neither ESD capability to IEC 61340-5-1 nor VDE testing to IEC 60900. Work on ESD-sensitive assemblies or on live parts calls for tools certified for that purpose.