Reinforced ESD partition wall for series 100 PCB holder, 359 x 20 mm - cab 8910102

The partition wall is the part that guides the boards inside the holder, and this version is additionally reinforced. With 32 guide grooves at 10 mm intervals across 359 mm it offers the full packing density of series 100 at only 20 mm depth. Being dissipative, it allows the holder to be used inside the EPA.

Key benefits

• ESD-safe version according to the manufacturer, therefore suitable for electrostatic sensitive assemblies in an EPA to IEC 61340-5-1.
• Reinforced design that counters deflection on heavy or densely loaded holders.
• 32 guide grooves at 10 mm intervals, giving up to 32 slots per holder.
• Funnel-shaped groove entries pick up the board and prevent edge damage on insertion.
• Overall 359 x 20 mm at 100 mm height, matching the profile and support rails of series 100.
• Low own weight of 0.4 kg, so a loaded holder still stays hand-portable.

Technical data

Applications

Placement, test, repair and in-house transport of electronic assemblies up to 100 mm high inside the EPA.

Compatibility and scope of delivery

Fits the cab series 100 PCB holder system, combined with profile rails and support rails of the same series. One partition wall is supplied per sales unit. This version has no bore for the groove lock, for which cab offers a separate variant.

Standards and notes

ESD-safe according to the manufacturer, suitable for work areas to IEC 61340-5-1. Manufacturer details under GPSR: CAB Produkttechnik, Wilhelm-Schickard-Straße 14, DE-76131 Karlsruhe, www.cabgmbh.com.