7461 Kraftform torque screwdriver factory pre-set 1.2 Nm (1.2-3.0 Nm), Rapidaptor 1/4" - Wera 05074716001

In series assembly with the same torque every time, values must not be changed by accident. The Wera 7461 is factory pre-set to 1.2 Nm, gives a distinct signal when the value is reached and can only be changed with an extra tool within the measuring range of 1.2-3.0 Nm.

Benefits

• Fixed pre-set value of 1.2 Nm for high repeat accuracy
• Adjustable only with an extra tool, afterwards check with an off-the-shelf torque tester
• Distinct signal when the pre-set value is reached
• Rapidaptor quick-release chuck: insert the bit, automatic locking, release by pushing the sleeve forward
• Unlimited loosening torque for slackening stuck screws
• Multi-component Kraftform handle with hard and soft zones for high working speeds

Applications

For series assembly in electronics, device manufacturing and precision engineering, wherever screws are always tightened to 1.2 Nm.

Standards and safety

Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 as well as Wera series 1 and 4. Changing the pre-set torque requires special tools and torque test equipment, the Wera Torque Service can help with this.