Phillips bit PH2, 25 mm long, 1/4 inch drive, pack of 10 - Bahco 59S/PH2

PH2 is the size that empties first in the tool trolley. At 25 mm the tip sits close to the holder, torque is transferred with hardly any wind-up, and the pack of ten keeps series assembly running.

Features

• Size PH2, the cross recess size most often needed in assembly and service
• Overall length 25 mm, low-torsion transfer right at the tool holder
• 1/4 inch hex drive to DIN 3126-C 6.3 and ISO 1173
• High-performance steel alloy, zinc-phosphated
• 10 bits per plastic box, sized for the high consumption of this dimension

Technical data

Applications

Series assembly in production, equipment building, control cabinet building, maintenance and service work.

Compatibility and scope of delivery

Suits bit holders, ratcheting bit screwdrivers and cordless drivers with a 1/4 inch socket. For series driving Bahco offers the same bit with a titanium nitride coating as 62TIN/PH2. Supplied as 10 bits in a plastic box.

Standards and notes

The drive conforms to DIN 3126-C 6.3 and ISO 1173. The bits are not VDE insulated and are therefore not approved for live working to IEC 60900. The manufacturer declares no dissipative version to IEC 61340-5-1 for these bits.