Phillips bit PH3, 25 mm long, 1/4 inch drive, pack of 10 - Bahco 59S/PH3

From PH3 upwards torque rises noticeably, and a soft bit rounds out the flanks of the recess. This version in high-performance steel alloy keeps its shape, and the short 25 mm body transfers the load with almost no wind-up.

Features

• Size PH3 for large cross recess screws in machine and plant building
• Overall length 25 mm, a short load path for the higher torque of this size
• 1/4 inch hex drive to DIN 3126-C 6.3 and ISO 1173
• High-performance steel alloy, zinc-phosphated against corrosion
• 10 bits per plastic box as bench stock

Technical data

Applications

Machine and plant building, vehicle and equipment assembly, maintenance on larger bolted joints.

Compatibility and scope of delivery

The 1/4 inch hex shank fits bit holders, ratcheting bit screwdrivers and cordless drivers. Supplied as one plastic box with 10 bits.

Standards and notes

The drive conforms to DIN 3126-C 6.3 and ISO 1173. The bits are not VDE insulated and are therefore not approved for live working to IEC 60900. The manufacturer declares no dissipative version to IEC 61340-5-1 for these bits.