Phillips bit PH1, TiN coated, 50 mm, torsion zone, pack of 5 - Bahco 62TIN/50PH1

In series driving it is rarely the rated torque that destroys a bit, it is the spikes at start-up and shut-off. The torsion zone in the shank takes up those spikes, and the titanium nitride layer keeps the edges of the PH1 tip sharp for longer.

Features

• Torsion zone in the shank that absorbs torque peaks and extends service life
• Titanium nitride coating, wear-resistant and intended for continuous series driving
• Size PH1 in a 50 mm length, also for recessed screws without an extension
• 1/4 inch hex drive to DIN 3126-C 6.3 and ISO 1173
• Body made from high-performance steel alloy
• 5 bits in a plastic box

Technical data

Applications

Series assembly with cordless and electric screwdrivers, production lines, equipment building, maintenance.

Compatibility and scope of delivery

The 1/4 inch hex shank fits bit holders, ratcheting bit screwdrivers and drivers with a matching socket. Supplied as 5 bits in a plastic box.

Standards and notes

The drive conforms to DIN 3126-C 6.3 and ISO 1173. The bits are not VDE insulated and are therefore not approved for live working to IEC 60900. The manufacturer declares no dissipative version to IEC 61340-5-1 for these bits.