Screwdriver bit Pozidriv PZ3, 1/4 inch C6.3, 50 mm, titanium nitride with torsion zone, pack of 5 - Bahco 62TIN/50PZ3

PZ3 transmits the highest torque in this range. Bit PZ3 from the 62TIN range is 50 mm long and sits on a 1/4 inch hex shank C 6.3 to DIN 3126 and ISO 1173. Delivery is a pack of 5 in a plastic box, intended for higher tightening torque in series assembly and plant construction.

Benefits in use

• Standardised 1/4 inch hex shank C 6.3 to DIN 3126 and ISO 1173, so the bit fits every bit holder, quick change chuck and bit ratchet with this seat.
• Drive profile PZ3 in 50 mm overall length, matched to higher tightening torque in series assembly and plant construction.
• High performance steel alloy, hardened for torque transfer rather than raw hardness, so the tip does not snap off under overload.
• Titanium nitride coating as a wear resistant surface, made for series fastening and permanent use in a machine screwdriver.
• Torsion zone in the shank absorbs torque peaks, which prevents premature wear of the profile and extends service life.
• Supplied as a pack of 5 in a plastic box, which keeps the stock sorted and within reach at the workstation.

Technical data

Applications

The bit is made for fastening work in trade, industry and workshop and covers higher tightening torque in series assembly and plant construction. It can be driven by hand through a bit holder just as well as in a cordless or air screwdriver.

Scope of delivery and compatibility

The box contains 5 bits PZ3. The C 6.3 seat fits all common 1/4 inch bit holders, bit ratchets and quick change chucks to DIN 3126.

Standards and notes

Drive to DIN 3126 form C and ISO 1173. The bits are not insulated, there is no VDE test to IEC 60900, so work on live parts is ruled out. The manufacturer states no dissipative version to IEC 61340-5-1 for this article.