Screwdriver bit TORX T25, 70 mm, 1/4 inch hex E 6.3, pack of 5 - Bahco 59S/70T25-5P

5 bits of profile T25 in a plastic box, each 70 mm long and with a 1/4 inch hex shank of form E 6.3. The zinc-phosphated surface on a high performance steel alloy is the standard finish for daily hand use.

Benefits

• The TORX T25 profile engages across six rounded flanks, spreading the load over a larger area than a cross recess and holding the bit in the screw without end pressure.
• Shank form E 6.3 with a 6.3 mm hex to DIN 3126 and ISO 1173, so the bit fits bit holders, bit ratchets and machine chucks without an adapter.
• Tool length 70 mm, sized for screws in deep bores and housing openings.
• Zinc-phosphated surface on a high performance steel alloy, which protects against corrosion in the workshop and inside the bit box.
• Sold as a pack of 5 identical bits in a plastic box, so the size in use is restocked at the workplace instead of being ordered one by one.

Applications

• recessed screws inside housing openings
• control cabinets and terminal boxes with sunk screw connections
• drive and gearbox work with long screw channels
• assembly jobs where a bit holder does not reach the screw

Compatibility and scope of delivery

The 6.3 mm hex shank of form E 6.3 is standardised, so the bit works with 1/4 inch bit holders, bit ratchet screwdrivers and bit adapters from any manufacturer. The scope of delivery is 5 bits of profile T25 in a plastic box. A bit holder or screwdriver handle is not included and is ordered separately.

Standards and conformity

The bit shank follows DIN 3126-E 6.3 and ISO 1173. The hexalobular recess of the matching screws is described in ISO 10664. The manufacturer property table lists the bit as not VDE tested, so it is not intended for live working to IEC 60900. No statement on ESD capability to IEC 61340-5-1 is available for this item.