1/4 inch screwdriver bit TORX T3, 25 mm long, zinc phosphated, pack of 5 - Bahco 59S/T3

TORX T3 is one of the smallest internal drives in electronics assembly, and a worn bit ruins the screw head within seconds. This bit is 25 mm long, zinc phosphated and comes as a pack of five, so a worn piece can be replaced right away.

Benefits in use

• TORX T3 profile for small screws on assemblies, housings and device engineering.
• 25 mm design with a 1/4 inch drive to DIN 3126-C 6.3 and ISO 1173, suited to bit holders and ratchet screwdrivers.
• Six driving flanks instead of two contact faces, the torque is spread and the bit does not slip out of the head.
• High performance steel alloy with a zinc phosphated finish as corrosion protection.
• Five bits per plastic box, a spare is always within reach at the workplace.

Technical data

Applications

Electronics production, device repair and fine assembly, wherever TORX T3 is used on board holders, housing shells and small drives. Also for service work where screws of this size are repeatedly loosened and refitted.

Scope of delivery and compatibility

The delivery comprises five TORX T3 bits in a plastic box. The 1/4 inch shank fits bit holders, ratchet screwdrivers and adapters to DIN 3126. The manufacturer supplies this range in packs of five for T3, T4, T5, T30, T40, T45 and T50 and in packs of ten for T6 through T27.

Standards and conformity

Drive to DIN 3126-C 6.3 and ISO 1173. The bit is not insulated, props_de lists VDE as no, so it is not intended for live working to IEC 60900. No dissipative rating to IEC 61340-5-1 is stated. TORX is a registered trademark of its owner.