Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
An extraction arm only helps if the nozzle stays where the fume is generated. This flexible Weller arm with 1000 mm reach and 32 mm duct diameter holds its set position and captures solder fume through a bevelled 45 degree aluminium nozzle directly above the assembly. It complements Weller extraction units with a 32 mm connection at a single workstation.
Extraction arm flexible 1 m duct 32 mm with 45 degree aluminium nozzle WF 32 - Weller T0053658099
WELLER
Original product
Net price (excl. VAT)
€139.95
Item
WL28358
Manufacturer no.
T0053658099
ESD · IEC 61340-5-1
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.T0053658099
ConditionNew
Article
WL28358
Frequently Bought Together
-
This Item:
€139.95
-
Solder fume extraction set for 2 workstations 190 m³/h bevelled nozzles Zero Smog TL Kit 2 SN - Weller FT91016699N
€1,377.55
-
Compact filter H13 main filter for MG 130 extraction unit - Weller 130-2000-ESDN
€250.92
Total price
During hand soldering the fume rises straight into the operator breathing zone. This Weller WF 32 extraction arm brings the capture point close to the joint with a bevelled 45 degree aluminium nozzle and can be positioned freely over its full 1000 mm reach.
Benefits
- Flexible arm with 1000 mm reach that stays in the position it is set to
- Bevelled 45 degree aluminium nozzle captures fume close above the board without blocking the view
- 32 mm duct diameter for connection to Weller extractors of this nominal size
- Aluminium construction, dimensionally stable and easy to clean
Technical data
| Item number | WL28358 |
| Model | T0053658099 |
| Manufacturer | Weller |
| Manufacturer item number | T0053658099 |
| Device series | WF 32 |
| Duct diameter | 32 mm |
| Reach | 1000 mm |
| Nozzle | aluminium, bevelled 45 degrees |
| Order unit | piece |
| ESD safe | no |
Applications
Capture of solder fume and flux vapour at hand soldering benches, in repair work and in prototyping. Equally suitable for bonding and dispensing tasks where the capture point has to sit close to the workpiece.
Compatibility and scope of delivery
Connects to Weller extraction systems with a 32 mm duct diameter. The arm is supplied with the bevelled nozzle fitted, the extraction unit and the bench mounting are not included. The arm is not declared ESD safe and is therefore not intended for EPA areas to IEC 61340-5-1.
| Certification | IEC 61340-5-1 |
|---|---|
| Manufacturer Nr. | T0053658099 |
| Manufacturer | Weller |
| Weight | 0.100000 |
| GPSR manufacturer information | WELLER Tools GmbH Carl-Benz-Strasse 2 DE-74354 Besigheim www.weller.eu |
| Article authenticity | Original product |
| Condition of article | New |
Customers Who Bought This Item Also Bought
