1/4 inch torsion bit TORX T20, 25 mm long, torsion zone, pack of 10 - Bahco 60T/T20

On a cordless driver a rigid bit rarely fails at the profile, it fails at the torque peak during tightening. This torsion bit has a springy torsion zone in the shank that absorbs those peaks and so reduces wear on the TORX T20 profile. Ten pieces come in the plastic box.

Benefits in use

• Torsion zone in the shank absorbs torque peaks and reduces wear on the profile.
• Rated by the manufacturer for particularly heavy duty use, that is continuous driving on a cordless tool.
• TORX T20 profile with six driving flanks, the torque is transferred over a broad contact area.
• 1/4 inch drive to DIN 3126-C6.3 and ISO 1173, matching bit holders, ratchet screwdrivers and machines.
• Steel grey surface with clear varnish as rust protection, high performance steel alloy as the material.
• Ten bits per pack, enough to keep an assembly line running without a reorder.

Applications

Series assembly with cordless drivers, machine and plant construction, vehicle and device assembly, maintenance. Useful wherever TORX T20 screws are driven in quantity at high tightening torque and a worn bit disrupts the cycle time.

Standards and conformity

Drive to DIN 3126-C6.3 and ISO 1173. The bit is not insulated, props_de lists VDE as no, so it is not intended for live working to IEC 60900. No dissipative rating to IEC 61340-5-1 is stated. TORX is a registered trademark of its owner.