ESD PU foam dissipative, pink, nubbed profile 1:1, soft, 253 x 153 x 20 mm - Warmbier 4930.1.32

Populated assemblies survive transport and interim storage undamaged when the surface underneath is soft and charge drains in a controlled way. This open cell PU foam sits in the dissipative range at a typical 10^10 - 10^11 Ohm and fits storage containers and compartment sets at 253 x 153 x 20 mm.

Benefits

• Electrostatically dissipative at a typical 10^10 - 10^11 Ohm, charge drains slowly instead of abruptly as over conductive material.
• Soft open cell structure absorbs shock and vibration, parts rest without pressure marks.
• Nubbed 1:1 profile, two layers take parts between the nubs and hold them in place.
• 253 x 153 x 20 mm, sized as an insert for storage containers and compartment sets.
• Pink colouring keeps it apart from the conductive black versions on the shelf.

Technical data

Application

The foam works as cushioning and as an intermediate layer for populated boards, displays, sensors and housing parts inside the EPA. Two pieces facing each other bed sensitive components during in house transport, a single piece serves as a soft base inside the storage container.