Tip extraction kit with stainless steel tubes and hose - Donaldson Bofa A1090025

Solder fume is captured most effectively right at the tip, not somewhere above the bench. The Donaldson Bofa A1090025 tip extraction kit contains everything needed to link an extraction tube to the iron and to the extraction unit, including a cleaning brush. It is intended for the TVT2, T1, T15, T30A, T60 and T100 extraction units.

Benefits

• Three stainless steel tubes, 6 mm at 220 mm and 110 mm plus 5 mm at 200 mm long
• Silicone hose 6.5 x 4.5 mm, 2.5 m long, for the connection to the unit
• Rubber tube with iron holder to fix the nozzle at the soldering iron
• Small brass brush for cleaning the extraction tube is included
• Four E-clips and one transparent plug as fitting and sealing parts

Technical data

Applications

The kit is used at hand soldering stations in electronics production, repair and laboratories where fume has to be drawn off at the tip. It also serves to add a tip extraction point to an extraction unit already in service.

Compatibility and scope of delivery

Suitable for the TVT2, T1, T15, T30A, T60 and T100 extraction units. Delivery includes three stainless steel tubes, 4 E-clips, 1 transparent plug, 2.5 m of 6.5 x 4.5 mm silicone hose, a small brass brush and a rubber tube with iron holder.