Kapton solder masking tape polyimide 16 mm x 33 m up to 260 °C

During wave and reflow soldering, connector contacts, gold pads and plated holes have to stay free of solder. This brown transparent polyimide masking tape with silicone adhesive covers them reliably, withstands 260 °C for one hour and comes off without residue.

Benefits

• Temperature resistant up to 260 °C for one hour, so it survives wave and reflow profiles
• Silicone adhesive releases without residue, no additional cleaning of masked areas
• Brown transparent, the masked spot stays visible during inspection
• Clean room suitable to ISO 6 for use in controlled manufacturing areas
• 76 mm roll core fits common hand dispensers and cutting units

Applications

Masking connector strips, contact pads and holes before wave soldering, protection during reflow and selective soldering, holding components and wires in place during rework, insulation work in motor and coil assembly.

Compatibility and scope of delivery

Delivery comprises one roll of polyimide solder masking tape, 16 mm wide and 33 m long, on a 76 mm core. Further widths of the same series are available separately.