ESD short divider for compartments, 253 x 80 x 3 mm, 11 slits, black - Warmbier 5420.253.20.80

Separating small parts and assembled boards inside a storage container only works in an EPA if the dividers themselves are conductive. This short divider is made of permanently volume-conductive polypropylene with a typical resistance to ground of 10^4 - 10^5 Ohm, so charges are carried away instead of being held inside the container.

Benefits

• Permanently volume-conductive polypropylene, the conductivity is part of the material rather than a surface coating.
• 11 slits spaced 20 mm apart, compartment widths can be set in 20 mm steps.
• Hollow-chamber profile, 3 mm material thickness and 550 g/m², dimensionally stable at low weight.
• High abrasion resistance, even when the compartment layout is rearranged frequently.
• 253 x 80 x 3 mm, suited to standard 400 x 300 mm storage containers.

Application

The short divider is pushed crosswise into the grid of a storage container and, together with the long dividers, splits it into single compartments. Typical contents are connectors, small placement parts and prepared assembly material that has to be kept apart and stored on a conductive surface. To change a compartment size the divider is simply pulled out and set into another slit.