Soldering tip sharp bent 30° 0.4 mm 350-398 °C T series - Thermaltronics TM70B325

Fine tips run out of headroom quickly on pads tied into copper planes. The TM70B325 solves that through the higher T70 band of 350-398 °C while keeping the fine geometry of a 0.4 mm point, a 30° bend and a 16 mm tip length.

Benefits

• Higher 350-398 °C band for lead-free solder and thermally connected pads
• 0.4 mm point stays fine enough for single SMD terminations
• 30° bend and 16 mm length give a shallow working angle and a clear view of the joint
• Temperature set by the Curie point, so there is nothing to dial in and no overshoot
• Lead-free and RoHS compliant

Applications

Fine soldering with lead-free alloys, rework on pads tied to ground or power planes, repairs on multilayer boards and soldering single terminations in tight neighbourhoods.

Compatibility and scope of delivery

Fits the SHP-T hand piece on the TMT-5000S-1 and TMT-5000S-2 soldering stations. One soldering cartridge is supplied.