ESD suction slot 100 mm DN50 black conductive - Alsident 1-5010-6

At benches with a narrowly defined emission source, a suction slot captures far more per m³ of extraction capacity than a large hood. This version with 100 mm width and 50 mm tube diameter is fully ESD safe and therefore belongs on soldering stations inside an EPA.

Benefits

• Suction gap for concentrated sources of contamination, high capture velocity right at the point of origin
• Internal distributor pipe ensures even extraction across the whole slot width
• Pipe socket and slot in chromated TCP aluminium for permanent conductivity
• Alternatively shock-resistant conductive polypropylene, ESD safe throughout
• Connects directly to DN50 extraction arms without an adapter

Technical data

Applications

The suction slot is used at hand soldering and rework benches, dispensing and bonding stations, cleaning work with isopropanol and test positions where the source is narrow and stationary and the arm can be brought in close.

Compatibility and scope of delivery

Fits Alsident System 50 extraction arms with a 50 mm tube diameter. One suction slot is supplied per order unit, without the extraction arm.

The conductive version is intended for use in ESD protected areas to IEC 61340-5-1 provided the extraction arm is properly earthed.