Bend 90 degrees DN80 antistatic incl. worm drive clamp - ULT 06.1.314

Duct bend for building DN80 extraction lines. It routes the duct through 90 degrees around corners, machine frames or bench edges without kinking the hose. The screw system design allows the bend to be screwed onto the outside of the extraction hose, and the supplied worm drive clamp secures the joint.

Benefits

• Antistatic design against electrostatic charging in the air stream
• DN80 nominal width matching hoses and ports of the same size
• Screw system, sockets and bends screw onto the outside of the hose
• Worm drive clamp included, joint made without extra parts
• Fixed radius instead of a kinked hose, lower pressure loss

Technical data

Applications

Building and modifying extraction ducting at soldering, laser and bonding workstations as well as on machine extraction systems where the duct is deflected at corners or wall penetrations.

Compatibility and scope of delivery

For extraction hoses and connection ports of nominal width DN80 in the screw system. Sockets and bends screw onto the outside of the hose, Y-pieces screw into the inside of the hose. The bend is supplied with a worm drive clamp.