Particulate filter cassette HEPA H14 for series 200.1 - ULT 02.1.519

In recirculation mode the last filter stage decides what the operator breathes. This particulate filter cassette in class H14 to DIN EN 1822 is the HEPA stage for ULT units of series 200.1 and reliably separates particles in the critical 0.1 to 0.3 µm range as well.

Benefits

• HEPA filter class H14 to DIN EN 1822, suitable for return air into the workspace
• Additional rating Coarse 85 percent to ISO 16890
• Retains metal, flux and laser fume aerosols that pass the pre-filter stages
• Exact-fit cassette for the filter shaft of series 200.1, no rework on installation
• Genuine ULT part, so the sealing seat is defined and no leakage air bypasses the frame

Technical data

Applications

Final filtration in solder and laser fume extraction, in fine dust processes and wherever filtered air is returned to the workspace and respirable particles must be held back safely.

Compatibility and scope of delivery

For ULT extraction and filter units of series 200.1. Supplied as one particulate filter cassette 02.1.519 per piece.

Filter class H14 is classified to DIN EN 1822, the Coarse 85 percent rating to ISO 16890.