Hose set 50 mm for 2 workstations, 2x 4 m with T-piece and nozzles - Donaldson Bofa A1020012

When one extraction unit has to serve two soldering workstations, hose by the metre is not enough. This BOFA set bundles every component for a sealed two-station installation in 50 mm nominal diameter: two flexible hoses of 4000 mm each, the T-piece for splitting the flow, two goosenecks with chamfered nozzles and all connecting hardware.

Benefits

• Two capture points from a single extraction unit with no extra planning, HDPE 91.5 degree T-piece included
• Flexible 50 mm hoses to UL94 V0 in black, 4000 mm each, for flexible bench placement
• Two chamfered 50 mm nozzles in ESD black capture solder fume close to the joint
• Gooseneck tubing 50 mm at 325 mm length holds the nozzle position without readjustment
• Four Cobra pipe clips, four cuffs and one ringseal sleeve give tight, low-loss transitions

Technical data

Applications

Connecting two manual soldering benches, rework stations or bonding stations to a shared BOFA extraction unit. Equally suitable for dispensing and cleaning stations where the airflow is to be split between two capture points.

Compatibility and scope of delivery

For BOFA extraction units with a 50 mm connection, including the Advantage range. Scope of delivery: 4x P0630002 Cobra pipe clip 50 mm, 1x P0660005 sleeve 50 mm HDPE ringseal, 1x P0670004 T-piece 50 mm HDPE 91.5 degree, 2x P1100023 flexi hose 50 mm UL94 V0 black 4000 mm, 4x P1100116 cuff Advantage 50 mm, 2x P1100134 chamfered nozzle 50 mm ESD black, 2x P1100204 gooseneck tubing 50 mm 325 mm.