Separator for SMD Spool Rack, Conductive, 330 x 330 x 2 mm - Warmbier 5200.330.330.2

Large tape reels need a divider over the full height of the compartment, otherwise they lean on each other and cannot be picked individually. This separator measures 330 x 330 x 2 mm and is conductive itself, so no insulating surface is created inside the compartment.

Benefits

• Polystyrene made permanently volume conductive by carbon, the property belongs to the material and does not fade over the service life.
• Typical point to point resistance of 10^4 - 10^5 ohm keeps the separator in the conductive range and avoids a charge trap between the reels.
• Format of 330 x 330 mm matches compartment layouts for reels of the 330 mm class.
• Only 2 mm thick, so dividing a compartment costs almost no width.
• Available singly, an existing rack can be upgraded compartment by compartment.

Application

The separator is used in the SMD component store and at setup stations inside the EPA to divide compartments holding large reels. Conductive aids stand on grounded surfaces there, so the charge they collect reaches the common ground point.