Tethering system set, lanyard 900 mm with fixed equipment carabiner, up to 1.5 kg - Knipex 00 50 05 T BK

Anyone moving a tool tether from one anchor point to the next does not want to attach the carabiner again every time. In the 00 50 05 T BK set the equipment carabiner 00 50 03 T is already fixed to the lanyard 00 50 01 T, tested in numerous drop tests for tools up to 1.5 kg.

Benefits

• Reliable tool protection with holding capacity for tools up to 1.5 kg proven in numerous drop tests.
• The carabiner is permanently joined to the lanyard, which saves assembly and stops the loose part getting lost.
• Large working radius from the roughly 90 cm lanyard, which stretches to about 1.5 m under load.
• Sewn flat belt loop at one end and a cord with cord stopper at the other.
• Attaches by the cord side or by the carabiner to climbing equipment and fixed points, so the belay moves quickly from the tool bag to the lanyard.
• Suitable for all KNIPEX pliers with a tether attachment point.

Technical data

Areas of use

Industrial climbing, shaft work, rescue services, arboriculture, bridge refurbishment, wind power and work at sea. Particularly practical when the same lanyard is clipped to changing anchor points over the course of a shift.

Standards and conformity

The set is not personal protective equipment and is not suitable for securing people, it serves tool protection only. According to the manufacturer it contains substances of very high concern under REACH, and the RoHS directive does not apply.