Images are examples, some edited with AI. The technical data are authoritative. AI notice
Hammerhead style carpenters' pincers for driving in, pulling and cutting nails, 210 mm - Knipex 51 01 210
Carpenters' pincers with a striking face that combine driving in, pulling and cutting nails in one tool. The cutting edges of approx. 60 HRC cut medium hard wire up to 2.2 mm dia. over an edge length of 25.5 mm. 210 mm long, 413 g, built to DIN ISO 9243.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Formwork, battening and strip-out jobs switch between driving in and pulling every few minutes. The 51 01 210 hammerhead style pincers save that tool change, as the striking face drives nails home while the 25.5 mm cutting edges of approx. 60 HRC cut medium hard wire up to 2.2 mm dia.
Benefits
- Multi-functional, driving in, pulling and cutting nails with a single tool.
- Striking face on the head hammers nails down, so no separate hammer is needed.
- Cutting edge hardness of approx. 60 HRC for clean cuts in medium hard wire up to 2.2 mm dia.
- Cutting edge length of 25.5 mm severs heavier nail shanks in one go.
- Slim 13 mm profile brings the jaws close to the timber surface.
- Polished head, black atramentised body and plastic coated handles.
Areas of use
Carpentry, formwork, interior fit-out, pallet work and strip-out jobs. Wherever nails are set and pulled again and wire is nipped, with little room for two separate tools.
Standards and conformity
The pincers comply with DIN ISO 9243 for carpenters' pincers. According to the manufacturer they contain no substances of very high concern under REACH. The RoHS directive does not apply to this product.
Technical data
| EAN | 4003773023104 |
|---|---|
| Pliers | black atramentised |
| Head | polished |
| Handles | plastic coated |
| Weight | 413 g |
| Dimensions | 210 x 53 x 13 mm |
| Standard | DIN ISO 9243 |
| Cutting capacity medium hard wire (diameter) | 2.2 mm dia. |
| Cutting edge length | 25.5 mm |
| REACH conformity | contains no SVHC |
| RoHS conformity | not applicable |
| Manufacturer | Knipex |
| Manufacturer Nr. | 51 01 210 |
| HS-Code | 82032000 |
| GPSR manufacturer information | KNIPEX-Werk Oberkamper Strasse 13 DE-42349 Wuppertal-Cronenberg www.knipex.de |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Germany |
| Height | 13 mm |
| Width | 53 mm |
| Colour | Black |
| Farbe | schwarz |
| Norm | DIN ISO 9243 |
| Overall length [mm] | 210 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
