Sheet metal nibbler for metal up to 1.2 mm and plastic up to 2.0 mm, cutting width 2.7 mm, 280 mm - Knipex 90 55 280

Tin snips distort the workpiece as soon as the cut leaves the edge and runs into the material. The sheet metal nibbler 90 55 280 removes a 2.7 mm wide strip instead and cuts iron, copper and aluminium sheet up to 1.2 mm thickness without deforming it.

Benefits

• Cuts iron, copper and aluminium sheet metal up to a maximum of 1.2 mm thickness and plastic up to a maximum of 2.0 mm thickness.
• Materials are cut without deformation, the sheet stays flat and does not have to be straightened.
• Clean cut edges, no trimming activities are needed on the cut profile.
• With chip breaker, the strip is broken up and does not jam inside the tool.
• Easy handling at 280 mm length and 461 g.
• Nickel-plated tool with multi-component grips.

Areas of use

Ventilation and air conditioning work, body and sheet metal work, electrical and control cabinet building. Suited wherever cut-outs, internal contours and curves are produced in thin sheet or plastic cleanly and without distortion.

Standards and conformity

The manufacturer does not state a tool standard for this product. According to the manufacturer the tool contains no substances of very high concern under REACH. The RoHS directive does not apply.