Socket 3/8 inch for Torx screws TX27, insulated 1000 V, 123 mm - Knipex 98 29 27

Where a screwdriver cannot deliver enough torque or the screw sits deep inside a housing, the ratchet takes over. The insulated 98 29 27 socket transfers the torque of a 3/8 inch square drive to Torx screws in size TX27 and is built to DIN EN 60900 and IEC 60900 for live working up to 1000 V.

Benefits

• Internal square 3/8 inch, fits common ratchets, extensions and torque wrenches of that drive size.
• Size TX27 for a positive fit in the Torx profile, the torque acts on six flanks instead of two edges.
• Chrome-plated basic tool, the steel under the insulation stays protected against corrosion.
• Built and tested to DIN EN 60900 and IEC 60900 for work on live parts up to 1000 V.
• Slim shape at 123 mm overall length and only 23 mm across, so tight installations stay reachable.
• Low weight of 58 g, the socket hardly loads the ratchet.

Technical data

Areas of use

Switchgear and distribution board building, maintenance of inverters and drives, battery storage and charging infrastructure, rail and power engineering. Wherever Torx screws in size TX27 are tightened with a ratchet or torque wrench on live installations.

Standards and conformity

The socket is built to DIN EN 60900 and IEC 60900. According to the manufacturer it contains no substances of very high concern under REACH. The RoHS directive does not apply.